Important Notes You Should Jot down on Wood Floor Moisture
When you work to avoid wood floor moisture, there are several layers that could contribute to the moisture problems as what discussed as well by Todd Shupe LSU. Acclimating and installing the flooring product on its own is only among the numerous steps that shod be done in order to correctly install wood flooring products.
Here is what you should know, wood floor that is installed on the concrete slab no matter if it has got a separate subflooring or not, the finished flooring can suffer problems due to the moisture picture in the concrete slab. Say that the new slab is not thoroughly dried to finished specs, that moisture is going to wick through the surface of concrete and can cause anything from adhesive failure, wood warping or cupping.
Todd Shupe LSU also said that if old slab begins to develop either moist patches or cracks, it’s more than enough to work its way up to the surface and provide a way for moisture to compromise wood flooring. Even with usual vapor barrier, still moisture could be a problem if ever the slab hasn’t dried properly. For this, it is smart to understand the significance of wood floor moisture testing on concrete.
Concrete moisture conditions are actually dependable with relative humidity testing that utilizes situ problems. Some other test methods including poly film test or calcium chloride testing have proven to be problematic in the past and slowly discontinued by different organizations. Then again, there are other known meters including the surface concrete meters that can be pretty useful in taking relevant readings of slabs already in place to know what areas of it are requiring further testing of real quantitative moisture testing methods. Surface concrete meters is not providing a thorough picture of the slab’s moisture condition and with that, true quantitative testing must be done as what proposed by Todd Shupe LSU.
While you being the flooring contractor might not perform the RH testing, it does well to review the job specifications called for and to what the test results are shown before the start of installation. Wood floor moisture problems in concrete slab might not be your ultimate responsibility but leaving this unchecked will become your problem in the future. This is why Todd Shupe LSU informs contractor to always deal with this issue professionally. Improper moisture condition in the wooden subfloor may result to moisture related problems in finished floor.
As a matter of fact, there are more things that you can learn from this subject as you take it from Todd Shupe LSU.